top of page
NTL INTERIORS SDN BHD
MAPEI Products Range
Mapecoat | 62W. PDF
Novoplan 21
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm.
Where to use:
- Interior levelling of new or existing substrates to make them ready to receive resilient or textile flooring in areas where a good resistance to loads and traffic in offices and public areas is required.
- Levelling existing flooring in terrazzo tiles, ceramic tiles, natural and magnesium stone.
Technical data:
Consistency: fine powder.
Colour: grey.
Pot life: 20-30 minutes.
Setting time: 50-70 minutes.
Set to light foot traffic: 3-4 hours.
Waiting time before installation: 24 hours.
Application temperature range:from +5°C to +35°C.
Mixing ratio: 25 parts water for 100 parts by weight of Novoplan 21.
Storage: 12 months.
Application: flat trowel or double rubber squeegee.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
25 kg bags.
Where to use:
- Interior levelling of new or existing substrates to make them ready to receive resilient or textile flooring in areas where a good resistance to loads and traffic in offices and public areas is required.
- Levelling existing flooring in terrazzo tiles, ceramic tiles, natural and magnesium stone.
Technical data:
Consistency: fine powder.
Colour: grey.
Pot life: 20-30 minutes.
Setting time: 50-70 minutes.
Set to light foot traffic: 3-4 hours.
Waiting time before installation: 24 hours.
Application temperature range:from +5°C to +35°C.
Mixing ratio: 25 parts water for 100 parts by weight of Novoplan 21.
Storage: 12 months.
Application: flat trowel or double rubber squeegee.
Consumption
1.6 kg/m2 per mm of thickness.
Packaging
25 kg bags.
Primer G
Synthetic resin based primer in water dispersion.
Applications:
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).
Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 - extremely low emission level.
Storage: 24 months. Protect from frost.
Consumption
0.1-0.2 kg/m2 depending on use.
Packaging
25-10-5 kg drums and 12x1 kg packs.
Applications:
Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling. The surfaces to be treated must be clean and porous.
Dilute Primer G with water from 1:1 to 1:3 to protect old floors before levelling, to fix the residual dusting and to provide even absorption of substrates prior to levelling or laying. Apply on perfectly dry gypsum or anhydrite surfaces (residual moisture content less than 0.5%).
Technical data:
Minimum drying time: 2 hours.
Application: brush or by spray.
EMICODE: EC1 - extremely low emission level.
Storage: 24 months. Protect from frost.
Consumption
0.1-0.2 kg/m2 depending on use.
Packaging
25-10-5 kg drums and 12x1 kg packs.
Planiprep SC
High-peformance, fiber-reinforced skimcoating compound.
Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.
Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to skimcoat and smooth minor surface variations and defects on common substrates. Planiprep SC creates a strong, durable surface ready for almost any floor application. Its unique formulation mixes easily with water and produces an easy-to-apply patching compound. Rapid-setting Planiprep SC allows for fast-track flooring installations in 30 to 60 minutes after application, depending on thickness and environmental conditions.
Untrabond 333
Multi-purpose adhesive with long open time for vinyl, textiles and linoleum floor and wall coverings.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Waiting time: 10-20 minutes.
Open time: 30-40 minutes.
Set to light foot traffic: 3-5 hours.
Ready for use: approximately 24-48 hours.
Storage: 12 months. Protect from frost.
Application: N° 1, 2 notched trowel, TKB A1, A2, B1, B2.
Consumption: 0.30-0.50 kg/m².
Packaging: 16 and 25 kg drums.
TECHNICAL DATA:
Consistency: creamy paste.
Colour: light beige.
Waiting time: 10-20 minutes.
Open time: 30-40 minutes.
Set to light foot traffic: 3-5 hours.
Ready for use: approximately 24-48 hours.
Storage: 12 months. Protect from frost.
Application: N° 1, 2 notched trowel, TKB A1, A2, B1, B2.
Consumption: 0.30-0.50 kg/m².
Packaging: 16 and 25 kg drums.
Adesilex P9
High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles.
Applications:
Interior and exterior floor and wall bonding of all types of ceramic tiles and mosaics on conventional walls with cementitious renders, cementitious screeds, anhydrite screeds and gypsum walls (specifically primed beforehand), painted interior walls, as long as the paint is well anchored, existing terrazzo or marble floors (maximum size 900 cm2) suitably cured concrete structures.
Bonding all types of ceramic and mosaic tiles (max. size of tiles 300 cm2 and stable substrates) in pools and basins.
Technical data:
Pot life: over 8 hours.
Open time: = 30 minutes.
Grouting:- walls: 4-8 hours;
- floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Colours: grey and white.
Application: notched trowel n. 4 or 5 or 6.
EMICODE: EC1 R - extremely low emission level.
Storage: 12 months.
Consumption
2-5 kg/m2.
Packaging
25 kg bags and 4x5 kg boxes.
Adesilex P9 is CE marked, as declared in ITT certificates n° 25050141/Gi (TUM) and n° 25080230/Gi (TUM) issued by the Technische Universität München laboratory (Germany)
Applications:
Interior and exterior floor and wall bonding of all types of ceramic tiles and mosaics on conventional walls with cementitious renders, cementitious screeds, anhydrite screeds and gypsum walls (specifically primed beforehand), painted interior walls, as long as the paint is well anchored, existing terrazzo or marble floors (maximum size 900 cm2) suitably cured concrete structures.
Bonding all types of ceramic and mosaic tiles (max. size of tiles 300 cm2 and stable substrates) in pools and basins.
Technical data:
Pot life: over 8 hours.
Open time: = 30 minutes.
Grouting:- walls: 4-8 hours;
- floors: 24 hours.
Set to light foot traffic: approx. 24 hours.
Ready for use: approx. 14 days.
Colours: grey and white.
Application: notched trowel n. 4 or 5 or 6.
EMICODE: EC1 R - extremely low emission level.
Storage: 12 months.
Consumption
2-5 kg/m2.
Packaging
25 kg bags and 4x5 kg boxes.
Adesilex P9 is CE marked, as declared in ITT certificates n° 25050141/Gi (TUM) and n° 25080230/Gi (TUM) issued by the Technische Universität München laboratory (Germany)
bottom of page